Introduction:

V40 series three-line switch type motorized valve is constituted by V40 series valve’s driver, valve’s body and replaceable valve pistil, which is used for controlling to open and close cold water and hot water in air condition system’s pipes, to control the indoor temperature constant. And it is designed for various uses. According to the different kinds of chosen models, it can adopt low-pressure single falchion controller, and can also adopt the line voltage single falchion controller, in order to control the movement of this valve. It adopts three-line connect mode, which only consume electricity while opening the valve and consume little electric power. The driver can freely unload, by opening or closing the valve, making the room temperature in the set scope of the thermostat. The valve of V40 series electrical valve has special construction, which can make the valve door closed tightly, and it has nothing to do with the pipe’s water pressure..

Characteristic:

Valve material: bronze valve body, valve pole material: stainless steel, seal material: EPDM lubber O shape seal circle. Anti-burn ABS engineering plastic, natural working time: 60HZ/H, the power that consumed by the valve in the opening 6 seconds, power consumed: in natural voltage, the largest power is 6W.

Outside dimension:

 

Model	Dimension C(mm)	Net weight (kg)
V40-215	98	0.65
V40-315	98	0.65
V401220	111	0.75
V40-320	111	0.75
V40-225	113	0.8
V40-325	113	0.8