Introduction:

AC801A series mechanical type temperature controllers are widely used for control of blower fan scroll, water valve, electronic draught of central air –condition heating and air conditioning system, etc. These series thermostats are high sensitivity, convenient installation, reliable and practical

Characteristic:

Mechanical controlled by inflated membrane box, kinds of connection ways, suitable for many kinds of work models. The switch switchover cold and hot, the outer shell adopts anti-burn ABS material. Outside embed installation, standard 86 type installing hidden box, which is very convenient.

Function:

Control of blower fan scroll, two-way valve, electric wind valve, electric draught , electric wind gate valve of three-line electric valves and three-gear wind valves.

Specification:

AC801A1101、AC801A1102、 AC801A1103、 AC801A1104

Installing instruction:

1. Thermostats must vertical install in air conditioning room and the wall of room must have good ventilative condition. The distance of thermostats and the ground is about 1.5M high, in order to the thermostats can accurately measure and control the room temperature. 2. Thermostats must be set far away from the doors or windows that light can penetrate directly, or heat source like cooking equipment or other heat source. 3. Unscrew the top screw of the box cover and remove the cover (no need to twist it all out, for fear it lose). Pull the connection line through the square middle hole of the soleplate, and fasten it to the assembled connection pole (see the serial number of the assembled connection pole) according to the regulation (notice: Do not dismantle the temperature adjustment knob during the work). 4.Fix the soleplate with related screw to the unison cover of box, install the cover and finally screw the cover tightly. 5. The matched line box is the inlayed wall type, the size is 86*86*32.